Firmware & Software Updates
Radio Firmware Updates
HPP-22 VERSION 1.19(1) 6/1/2016
- Aurora 9X wer. 1.02(2) Firmware Update (01/04/2017)
Maintenance Fix- Fixed Trim operation bug when activating Throttle Curve and Idle Down functions.
- Fixed the Trainer Function binding issue bug.
- LYNX 4S ver. 1.05(0) Firmware Update (12/06/16)
Added functions [System -> Function Menu]- RACE MODE - Race Mode provides for reduced latency when used with the Axion 2 Receiver
Note: Due to the faster response time users may see a slight jitter in high response servos, if this occurs it is recommended you switch Race Mode off.
Cosmetic Change
- RACE MODE - Race Mode provides for reduced latency when used with the Axion 2 Receiver
- Deleted the logo on Lynx 4S display
- Aurora 9X ver. 1.02(1) Firmware Update
Added functions- Added French Language
Maintenance release for following functions
- Fixed the graph set-up value error when copying Flight Condition from Pitch Curve and Throttle Curve.
- Fixed the set-up value error when inserting a Flight Condition after deleting it.
HPP-22 VERSION 1.19(0) 7/17/2015
- LYNX 4S ver. 1.04(0) Firmware Update (04/18/16)
Added functions- Added the selection of RX Model “Proton 4e” as Hitec’s New Telemetry Capable Micro 4CH Receiver.
- Added the adjustment function of Trim & Dial set up step value from 1 to 100.
- Added ST Brake(steering brake) function to Adjust the brake rate by Steering movement.
Maintenance release for following functions
- Improved Timer function : “Timer Reset” is available by pressing the timer button over 1 sec.
- LYNX 4S ver. 1.03(0) Firmware Update (09/14/15)
Added Functions- Now displays a warning message when changing Mix Type
- LED can be turned “OFF” in the LED setup
- Users can now select “SCREEN TYPE” for each model
- User can set the “LED” color for each model
Improved Functions
- Moved ”RF-SCAN” menu to the MANAGEMENT screen to avoid confusion
- Saves the setup value on the Auxiliary (AUX) channel
- Fixed the update error bug
- Aurora 9X Maintenance Release
- Improved Aurora 9X model data backup function
HPP-22 VERSION 1.18(0) 5/14/2015
- LYNX 4S ver. 1.02 Firmware Update
Added Functions- Added Multi-Language Function (English, German, Czech, Italian, French) available to choose the language while updating the firmware
- Added Mixing Function for brakes on 1/5 scale gas powered vehicles. Using either D1 or D2 dial you can setup the value of the front and rear brakes separately.
- Added Mixing Function for mechanical brakes on 1/5 and 1/8 scale electric vehicles. Now you can apply the brake mixing function using a servo in electric vehicles.
Maintenance Release
- Improved Fail-Safe Function
- Improved menu of Reverse, EPA, S-Trim
HPP-22 VERSION 1.17(1) 4/19/2015
- Aurora 9X ver. 1.02(0) Firmware Update
- Add Model data backup
HPP-22 VERSION 1.16(0) 1/19/2015
- Aurora 9X ver. 1.01(0) Firmware Update
Added functions- Added additional languages (English, German, Spanish, Italian, Czech)
- Added Landing Mix in ACRO, GLID model setup
Improved functions
- Changed 'Timer' so that sound is On/Off selectable
- 'Flight Condition' named the same as in the Aurora 9
- Default value of Mix point 7 changed to 3 point (except on P.Curve & T.Curve)
- 'Throttle Lock' function (on Model type)
- Graph level on TX battery voltage
- 'Interg Time' reset
- Sensor station screen battery icon when use Optima RX’s
- Switch selection on 'Flight Condition'
- Cockpit voltage
- Scanning icon on Spectra menu
- Rate value when use Aileron Differential
- Elevator Trim on Swash type 4 Servo in Heli menu
- Screen appearance when initially powered on
Aurora 9 Firmware Updates
IMPORTANT INFORMATION REGARDING UPDATING YOUR AURORA 9 RADIO
- Uninstall the old HPP-22 software and reinstall the new software found HERE
- Disable Anti Virus software (if needed) for the install.
- Run as Administrator or turn off or down user account control in the control panel/user accounts.
HPP-22 VERSION 1.13(0) 1/15/2013
- ECLIPSE 7 PRO 2.4GHz ver.1.03(0) Firmware Update
- Added Upgrade Mode and HPP-22 Mode
- Added HTS-Advance Display
- Model Data can save to PC and bring the Model Data from PC
- Improved Latency
- OPTIC 6 SPORT 2.4GHz ver.1.03(0) Firmware Update
- Improved Latency
- AURORA 9 2.4GHz ver. 1.09(0) Firmware Update
- Added displays for HTS-SS Advance Sensor station and related sensors
(HTS-AirSpeed, HTS-Variometer, HTS-ServoManager, HTS-EngineTemp) - Added five additional languages: French, German, Czech, Italian & Spanish
- Corrected time flow error
- Corrected Offset (OST) function error in Rudder to Elevator mix
- Corrected Servo Speed operation error in Camber Mix
- Added displays for HTS-SS Advance Sensor station and related sensors
HPP-22 VERSION 1.12(0) 3/5/2012 (Download Latest HPP-22 Software Here)
- OPTIC 6 SPORT 2.4GHz ver.1.02(0) Firmware Update
- Improved trainer function
HPP-22 VERSION 1.04(1) 12/20/2010
- Aurora 9 ver.1.07(2) Firmware Update
- Fixed Imperial speed measurement display error
HPP-22 VERSION 1.04(0) 12/10/2010
- New Features:
- OPTIC 6 SPORT 2.4 Setup capabilities added
- AURORA 9 Multi-Language Menu now available in Spanish
- Aurora 9 2.4GHz ver.1.07(1) update version can be selected in the menu of the HPP-22
- OPTIC 6 SPORT ver.1.04(1) & OPTIC 6 SPORT 2.4GHz ver.1.01(1) Firmware Update
Bug Fix:- When ADIF function activated, and Crow mix is in use, channel 5 did not respond when SW1 was selected as STCK function.
HPP-22 VERSION 1.03 9/30/2010
- AURORA 9 – Added Multi-Language menus available in English, German, French, Italian & Czech
HPP-22 VERSION 1.02 8/2/2010
- Aurora 9 ver. 1.07 Firmware Update
Added functions- System Password Lock Function: Requires password to access the system menu.
- Quick Model Select Function: You can confirm & select your model from the start up screen.
- Receiver Battery Low Voltage Warning Function: You can select the Low Battery Warning Alarm activation level.
- Touch Beep Sound On/Off Function: You can turn the sound on and off for the touch screen.
- Touch screen calibration function
- Warning Selection at Start up Function: Give the ability to choose whether you want the start-up warning on or off (Abnormal Throttle and Flight Condition).
Improved functions
- Timer Reset Method: Press & hold either timer screen for 2 seconds to reset.
- Menu Name Changed: Power > SYS. MGMT, Auto Power Off > Auto Hibernation.