Monthly Archives: June 2016

Press Release: HFP-30 Digital Servo Programmer and Universal Servo Tester

Posted on by

pr-hfp-30

Our lightweight HFP-30 Field Programmer is the latest in digital servo testing and programming. Packed with advanced features and a large, easy-to-read LCD screen, it efficiently programs all Hitec digital servos, including the HS-5XXX, HS-7XXX, brushless HSB-9XXX, and the latest D-Series. Operating on a wide voltage range of 4.8~8.4, the Hitec HFP-30 is your hobby’s best, must-have accessory.

 

Servo Series
Model D-Series HSB-9XXX HS-7XXX HS-5XXX
End Point Adjustments X X X X
Direction X X X X
Fail Safe X X X X
Dead Band X X X X
Speed (Slower) X X X X
Soft Start Rate X X
Overload Protection X X
Resolution X
Data Save / Load X X X X
Program Reset X From File X X

 

HFP-30 Field Programmer | Stock# 44427

Press Release: Hitec Vektor 280

Posted on by

pr-vektor280

Our swift and fearless Vektor 280 is a high performance FPV racer built with a compact, integrated circuit board system for reduced weight and a sturdy, resilient carbon fiber frame for durable flight. Completely assembled for your convenience, this speedy flier only requires a 5-channel transmitter, a 5.8GHz receiver, 3~4S LiPo battery and optional video goggles to get you joining the quad racing, adrenaline-pumping ranks in no time.


Vektor 280 Features:

  • Completely Assembled 280-class FPV Racing Quad
  • Integrated System Board with the ESC’s, Flight Controller and Video Transmitter on a Single Board for Reduced Weight
  • High Quality Carbon Fiber Frame with 3mm Arms
  • Four 20-Amp Speed Controls with SimonK OneShot Setting
  • Open Pilot CC3D Flight Controller
  • 5.8GHz 600mw* Video Transmitter
  • Bright Intelligent LED System
  • Low Battery Warning Feature
  • Drone Finder Function
  • Weight: 348 grams/12.28 ounces


Installed Power System:

  • Brushless Motors – 2204 2150KV
  • Propellers – 6 x 3
  • ESC’s – 20A w/SimonK OneShot
  • Flight Time: 9-12 minutes


Flight Control System:

  • CC3D Atom with Open Pilot
  • Powerful STM32 32-bit MCU with 128KB Flash and 20KB RAM
  • MPU6000 3 Axis Gyroscope / Accelerometer
  • Supported Software: Windows, Mac and Linux
  • Works with PWM, PPM, Spektrum® Satellite and S-Bus Receivers


FPV System:

  • Video Camera – 400K Pixels 135º Field of View
  • Video TX – 600mw 32-Channel 5.8GHz


Hitec Vektor 280 | Stock# 61131