Press Release: X2 700 – AC/DC Multicharger

Posted on December 17, 2015 by hitec

Hitec’s powerful X2-700 Multicharger is the sophisticated charging choice for all your high amperage batteries. This DC powerhouse features two 700-watt output ports for increased capacity and supports all battery chemistries, including the latest LiHV cells. The microprocessor control and an internal resistance meter make this the star at the workshop, flying field and track. Hitec’s free “Charge Master” software allows full PC control of the X2-700 through its integrated USB port from basic setup to full software analysis of your battery’s health and performance. Streamline your operations with the new Synchronous Mode as the second output port automatically mirrors your channel one settings to charge multiple similar batteries with minimal setup time. Reliable and durable, this is a must-have charger for all seasoned hobbyists.

X2 700 Features:

Twin Channel Charger with Two Independent Circuits
Input Power Source: 11-30V DC
DC Mode Output: 700W Port A; 700W Port B.
Total Maximum Output: 1400W
“Charge Master” Software for PC Interface
Synchronous Mode for Setting Both Charge Channels thru Channel One

Charging Specifications:

DC Input Voltage: 11 – 30 Volts DC
Total Charge Circuit Power: 1400 Watts (700 Watts x 2)
Charge Current Range: 0.1 – 30.0 Amps x 2
Discharge Current Power: 30 Watts x 2
Discharge Current Range: 0.1 – 5.0 Amps
Current Drain for LiPo Balancing: Max 800mAh per cell
NiCd/NiMh Battery Cell Count: 1 – 20 cells
– Capacity Range 100 – 50,000mAh
LiPo/LiHV/LiFe/LiIon Cell Count: 2 – 8 cells
– Capacity Range 100 – 50,000mAh
Pb Battery Voltage: 2 – 24 Volts
– Capacity Range 100 – 50,000mAh
New Weight: 2.69 lbs. (1220g)
Dimensions: 7.9 x 5.5 x 2.2 in. (200 x 140 x 55mm)

Available Model:

X2 700 – AC/DC Multicharger | Stock# 44239

Press Release: X1 mini – AC Input Balance Charger/Discharger

Posted on November 13, 2015 by hitec

Hitec’s latest unbeatable battery charger is the new X1 mini. It is the perfect affordable answer for beginner hobbyists as well as an excellent addition to the experienced RC enthusiasts’ charger collection. Featuring a compact design for maximum portability and convenience, the reliable X1 mini delivers 60 watts of power and capably charges all battery chemistries, including the new generation LiHV. Its 6-amp power supply and user-friendly software will keep you fully charged and ready, both in the workshop and on the go!

X1 mini Features:

Compact Size and Stylish Design
Battery Meter
Battery Internal Resistance Meter
PC Communications: USB Port for PC Control & Firmware Upgrade
Re-Peak Mode for NiMH/NiCd Batteries
Charger Protection: Over Temperature, Over Capacity & Over Short Circuit Reverse Polarity

Charging Specifications:

AC Input: 100-240 Volts AC
Total Charge Circuit Power: 60 Watts AC Input
Charge Current Range: 0.1 – 6.0 Amps
Discharge Current Range: 0.1 – 2.0 Amps
Discharge Current Power: 10 Watts
Charges NiMH, NiCd, LiPo, LiHV, LiFe, Li-Ion and Lead Acid Batteries
NiCd/NiMH Cell Count: 6-8 Cells
LiPo/LiHV/Li-Ion/LiFe Cell Count: 2-4 Cells
Pb Voltage: 6-12 Volts
Net Weight: 0.68 lbs (310g)
Dimensions: 4.41 x 4.17 x 2.05in (112 x 106 x 52mm)

Available Model:

X1 mini Charger | Stock# 44241

Press Release: ParkMaster Pro

Posted on November 6, 2015 by hitec

The ParkMaster Pro: The Original … Re-Mastered!

Prepare for the flights of your life with the latest from Multiplex. Building on the international success of our original ParkMaster 3D, the ParkMaster PRO is the new champion, capable of the most extreme park flyer aerobatics. Square-section carbon fiber spars and longerons produce an unbeatably rigid airframe, while also shaving precious weight. The reinforced motor mount is suitable for more powerful motors, and an optional 4mm carbon firewall plate offers increased stiffness, lower weight and high tech bling! With a stunningly fierce design, the light weight and maneuverable ParkMaster PRO is optimized for outdoor aerobatics and docile handling. It excels in confined spaces and moderate wind and is easily capable of torque-rolls, rolling loops and anything else you can throw at it! Available as a Kit or a Kit Plus version which includes the brushless motor, speed control, propeller with driver and Karbonite servos, the ParkMaster Pro is your next favorite model!

ParkMaster Pro Features:

Carbon Spars for Maximum Airframe Rigidity
CFRP Reinforced Motor Mount for Support and Stability
Extremely Rugged Carbon Fiber Undercarriage
Docile and Agile Flight Characteristics
3D Aerobatic Capability
Low Minimum Airspeed
Pre-fabricated Elapor® Foam Components

ParkMaster Pro Specifications:

Wingspan: 38 3/8 in. (975 mm)
Overall Length: 40 1/2 in. (1030 mm)
All-up Weight: Min. 18.4 oz. (520 g)
Total Surface Area: 450 sq. in. (29 dm²)
Total Surface Area Loading: 5.9 oz./sq. ft. (18 g/dm²)
Control Channels: 4 RC functions – Elevator, Rudder, Aileron & Throttle
Flight Time: 5 Minutes
Recommended Battery: 3S 950mAh Li-Po

Available Models:

ParkMaster Pro Kit Version | Stock# M214275
ParkMaster Pro Kit Plus Version | Stock# M264275
Includes: HIMAX C 2816-1220 motor, MULTIcont BL-30 S-BEC Speed Controller,
10 x 4.7” Propeller with Adapter, and Four Nano-Karbonite Servos
Optional Carbon Firewall | Stock# M332609

Press Release: Energy Rotor Brushless ESCs

Posted on October 28, 2015 by hitec

Take Your Multirotor to New Heights

Designed specifically for multirotors, Hitec’s new ENERGY ROTOR speed controls possess the same reliability and quality you have come to expect throughout our entire ENERGY SPORT product line. These must-have brushless controllers provide smooth and accurate throttle linearity for all your flights. Flashed with the pilot-preferred BLHeli firmware and utilizing ONESHOT synchronized communication with your flight controller, the ENERGY ROTOR speed controls achieve lightning-fast response and interaction with your model. Propel your rotor to Hitec heights!

Energy Rotor ESCs Features:

BLHeli Firmware
Pre-set ONESHOT Synchronization
Wide RPM Motor Range Compatibility
New Generation MOSFETs for Increased Efficiency
Smooth, Linear Throttle Response
Fast Refresh Rate up to 600Hz

Model	Part #	Continuous / Burst Current Rating	Battery / Cell	Dimensions (in)	Weight (oz)
Energy Rotor 12A	61071	12A / 20A	5-12N / 2-4Li	0.59 x 1.02 x 0.24	0.28
Energy Rotor 18A	61082	18A / 30A	5-12N / 2-4Li	0.47 x 0.87 x 0.17	0.19
Energy Rotor 20A	61072	20A / 30A	5-18N / 2-6Li	0.79 x 1.85 x 0.31	0.81
Energy Rotor 30A	61073	30A / 40A	5-18N / 2-6Li	0.79 x 1.85 x 0.31	0.71
Energy Rotor 40A	61074	40A / 50A	5-18N / 2-6Li	0.79 x 1.85 x 0.39	1.09
Energy Rotor 60A	61075	60A / 70A	5-18N / 2-6Li	1.18 x 2.17 x 0.51	1.76

Available Models:

Energy Rotor 12A | Single – Stock #61070; 4-Pack – Stock #61083
Energy Rotor 18A | Single – Stock #61082; 4-Pack – Stock #61084
Energy Rotor 20A | Single – Stock #61072; 4-Pack – Stock #61085
Energy Rotor 30A | Single – Stock #61073; 4-Pack – Stock #61086
Energy Rotor 40A | Single – Stock #61074; 4-Pack – Stock #61087
Energy Rotor 60A | Single – Stock #61075; 4-Pack – Stock #61088

Press Release: Hitec’s D-Series Dynamos

Posted on October 2, 2015 by hitec

Hitec is proud to introduce our D-Series Dynamo Servos – the titanium gear D940TW, D945TW, D950TW & D980TW; the metal gear D625MW & D645MW and the waterproof, mega scale, IP-67 rated D840WP & D845WP! All Hitec D-Series servos have been designed using our brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with 3mm hex screw, each D-series servo brings monster performance never known before in the market.

	4.8 Volts		6.0 Volts		7.4 Volts
Model	Speed	Torque	Speed	Torque	Speed	Torque	Part#	Dimensions	Weight
D940TW	0.11 sec/60º	139oz-in	0.08 sec/60º	187oz-in	0.07 sec/60º	229oz-in	36940	1.57 x 0.79 x 1.50 in	2.40 oz
		10.0kg-cm		13.5kg-cm		16.5kg-cm		39.9 x 20.1 x 38.1 mm	68.0 g
D945TW	0.16 sec/60º	194oz-in	0.12 sec/60º	250oz-in	0.10 sec/60º	319oz-in	36945	1.57 x 0.79 x 1.50 in	2.40 oz
		14.0kg-cm		18.0kg-cm		23.0kg-cm		39.9 x 20.1 x 38.1 mm	68.0 g
D950TW	0.23 sec/60º	292oz-in	0.17 sec/60º	403oz-in	0.14 sec/60º	486oz-in	36950	1.57 x 0.79 x 1.50 in	2.40 oz
		21.0kg-cm		29.0kg-cm		35.0kg-cm		39.9 x 20.1 x 38.1 mm	68.0 g
D980TW	0.28 sec/60º	361oz-in	0.21 sec/60º	500oz-in	0.17 sec/60º	611oz-in	36980	1.72 x 0.88 x 1.57 in	2.76 oz
		26.0kg-cm		36.0kg-cm		44.0kg-cm		43.7 x 22.4 x 39.9 mm	78.2 g

	4.8 Volts		6.0 Volts		7.4 Volts
Model	Speed	Torque	Speed	Torque	Speed	Torque	Part#	Dimensions	Weight
D625MW	0.20 sec/60º	87oz-in	0.15 sec/60º	122oz-in	0.13 sec/60º	139oz-in	36625	1.59 x 0.77 x 1.48 in	2.11 oz
		6.3kg-cm		8.8kg-cm		10.0kg-cm		40.6 x 19.8 x 37.8 mm	59.8 g
D645MW	0.28 sec/60º	115oz-in	0.20 sec/60º	158oz-in	0.17 sec/60º	180oz-in	36645	1.59 x 0.77 x 1.48 in	2.11 oz
		8.3kg-cm		11.4kg-cm		13.0kg-cm		40.6 x 19.8 x 37.8 mm	59.8 g

	4.8 Volts		6.0 Volts		7.4 Volts
Model	Speed	Torque	Speed	Torque	Speed	Torque	Part#	Dimensions	Weight
D840WP	0.17 sec/60º	264oz-in	0.14 sec/60º	333oz-in	0.11 sec/60º	417oz-in	36840	2.60 x 1.26 x 2.44 in	8.0 oz
		19.0kg-cm		24.0kg-cm		30.0kg-cm		66.0 x 32.0 x 62.0 mm	227 g
D845WP	0.26 sec/60º	451oz-in	0.21 sec/60º	562oz-in	0.17 sec/60º	694oz-in	36845	2.60 x 1.26 x 2.44 in	8.0 oz
		32.5kg-cm		40.5kg-cm		50.0kg-cm		66.0 x 32.0 x 62.0 mm	227 g

DPC-11 Features:

Customize the Parameters of Hitec’s Programmable DXXX, HSB-9XXX, HS-7XXX and
HS-5XXX Series Servos
Test Settings Prior to Servo Installation
Save and Load Servo Parameter Files and Restore the Factory Default Files with the DPC-11 Software
Download the DPC-11 Software to your PC

Press Release: HG3XA Gyro System

Posted on September 10, 2015 by hitec

Fly Right with Hitec’s HG3XA Gyro

Hitec is excited to introduce our compact HG3XA gyro for all your standard wing, delta wing and v-tail aircraft. This lightweight, three-axis gyro provides high performance stabilization, increased precision and smooth navigation in the most challenging flight conditions. The HG3XA gyro’s accurate angular motion detection will instantaneously improve your 3D performance, making hovers, torque rolls, harriers and knife edge passes easier to master. Three trimming potentiometers allow you to separately adjust the gyro gain of your aircraft’s aileron, elevator and rudder. Toggle between three different flight modes while your model is airborne: “off”, “standard” and “heading hold” mode. Our complete package includes the HG3XA gyro, connecting cables and adhesive mounting pads. Fly Right with Hitec!

HG3XA 3-Axis Stabilization Gyro System Specifications:

Voltage Range: 5 ~ 6V DC
PWM Output: 50Hz, or 20ms
PWM Signal: 1520 ± 500μs
Full Scale Range: 970 ~ 2070μs
Gyro Sample Rate: 1KHz
Operating Temperature: -40°C to 85°C
Dimensions: 1.85 x 1.30 x 0.55 in / 47.0 x 33.0 x 14.0 mm
Weight: 0.39 oz / 11.0 g

Press Release: HS-1100WP Ultra-Heavy Duty, Giant, Waterproof Servo

Posted on August 21, 2015 by hitec

Giant Scale Servos, Watch Out!

Giant scale servos, watch out! There’s a new sheriff in town! Our HS-1100WP waterproof, heavy-duty digital giant brings out-of-this-world torque performance and strength to all your large scale vehicles, airplanes and robotic projects. Made with impressively durable steel gears, robust EMI-shielded cases and an IP-67* rated code for maximum underwater protection, this addition to our giant servo line has Hitec’s unrivaled industrial digital circuitry and engineering. Your world just got BIGGER with the introduction of the HS-1100WP!

HS-1100WP Features:

Non-programmable, Industrial Digital Circuitry
EMI-shielded Cases
*International Protection Code 67 Rating (6=Dust Tight; Complete Protection Against Contact 7) – Immersion up to 1 meter
Durable Steel Gears
14.8V 2-Cell LiPo Capability
5-Pole Carbon Brush

Specifications:

Motor Type:	5 Pole Carbon Brush
Bearing Type:	Dual Ball Bearing
Speed (11.1V/14.8V):	0.26 / 0.19 seconds
Torque oz./in. (11.1V/14.8V):	1167 / 1528
Torque kg./cm. (11.1V/14.8V):	84 / 110
Size in Inches:	2.52 x 1.30 x 2.87
Size in Millimeters:	64 x 33 x 73
Weight oz.:	12.80
Weight g.:	363

Press Release: Optima SL Receiver

Posted on August 20, 2015 by hitec

Hitec Expands the Optima Receiver Line!

We are pleased to introduce the full-range Optima SL receiver, specifically designed for flybarless system helicopters. With advanced telemetry capabilities and exceptional security, this receiver utilizes an S-Bus protocol for maximum compatibility, keeping you connected to your model like none other. The Optima SL is designed with a dual-BODA antenna, a supplementary power connection (SPC) and hold and fail-safe function, safeguarding your heli during the most complex and agile maneuvering. Reliability and control are yours with Hitec!

Optima SL Specifications:

One S-Bus Output and Eight PWM Channels
Dimensions: 1.89 x 1.12 x 0.60 in.
Weight: 0.78 oz.

Press Release: X2 AC Pro 2 Port AC/DC Multi-Charger

Posted on August 18, 2015 by hitec

Expanding on the success and reliability of Hitec’s X2 AC Pro, we introduce its pumped-up brother, the X2 AC Plus! Our AC/DC dual port charger/discharger delivers 200 watts of total power in AC mode, and up to 300 watts total output in DC! Its versatile power distribution mode lets you optimize the output in AC mode for maximum charge efficiency. Additionally, the X2 AC Plus is equipped with a built-in heavy duty 60W soldering iron with adjustable operating temperatures from 400 to 840˚F (200-450℃), making it a convenient and handy feature at the field as well as at home. Easily store and recall 20 charge/discharge profiles. Capable of charging all battery chemistries, including the latest high voltage LiPo’s (LiHV), this all-in-one charger has advanced functions such as Battery Meter and Battery Internal Resistance Meter modes. For the ultimate convenience, you can also configure your settings and keep an eye on your charge progress with your Smartphone or PC! Charging gets better with Hitec!

X2 AC Plus Features:

Twin Channel Charger with Two Independent Circuits
Input Power Source: 11-18V DC (360W) or 100-240V AC
DC Mode Output; 200W Port A; 100W Port B; 300W Total Output Maximum
AC Mode Power Distribution Mode for Ultimate Flexibility; 200W Total Output
Example 1:
Channel A – 150W, then Channel B – 50W for a Total 200W Power
Example 2:
Channel A – 100W, then Channel B – 100W for a Total 200W Power
Built-in Switching AC Power Supply
Includes 60W Soldering Iron, 400 to 840˚F (200-450℃)
USB support for PC and Wi-Fi Smart Phone Interface

Charging Specifications:

Charges NiMH, NiCd, LiPo, LiHV, LiFe, Li-Ion and Lead Acid Batteries
NiCd/NiMH Cell Count: 1-15 cells
LiPo/LiHV/Li-Ion/LiFe Cell Count: 1-6 cells
Pb voltage: 2-20 volts
Charge Current Range: 0.1-10.0 amps
Maximum Charge Output: AC 200W / DC 300W (200W + 100W)
20 Programmable Profile Settings
Independent Cell Balancing Circuitry

Optional WiFi Module Features:

Compatible with the X2 AC Pro Charger
View, Change & Customize your X2 AC Pro Options via Smartphone
Supports Both iOS and Android Devices

Press Release: HSR-2645CR Robot Servo

Posted on July 7, 2015 by hitec

The New Continuous Rotation Robot Servo

Expanding on the durable and responsive power of the HSR-1425CR continuous rotation servo, we have developed the digital HSR-2645CR. This non-proportional, continuous rotation servo delivers the commanding force you require, with intense, powerful torque, wide voltage capability and Hitec’s impressive metal gear train. Responsive high speed motion and quick directional shifts make this the go-to servo for your most complex and specialized applications. Its programmability and “all-in” solid build will have radio control, robotic and engineering enthusiasts cheering. Continuous performance by Hitec!

HSR-2645CR Specifications:

Programmable Digital Circuit
Linear Speed Control
Quick Directional Shift
Low Dead Band for Precise Control
Wide Input Voltage Range

	4.8 Volts		6.0 Volts		7.4 Volts
Model	Speed	Torque	Speed	Torque	Speed	Torque	Part#	Dimensions	Weight
HSR-2645CR	46 RPM	111oz-in	58 RPM	139oz-in	72 RPM	167oz-in	32645CR	1.59 x 0.77 x 1.48 in	1.87 oz
		8kg-cm		10kg-cm		12kg-cm		40.6 x 19.8 x 37.8 mm	53 g