Press Release: Energy Rotor Brushless ESCs

PR-EnergyRotorESCs

 

Take Your Multirotor to New Heights

Designed specifically for multirotors, Hitec’s new ENERGY ROTOR speed controls possess the same reliability and quality you have come to expect throughout our entire ENERGY SPORT product line. These must-have brushless controllers provide smooth and accurate throttle linearity for all your flights. Flashed with the pilot-preferred BLHeli firmware and utilizing ONESHOT synchronized communication with your flight controller, the ENERGY ROTOR speed controls achieve lightning-fast response and interaction with your model. Propel your rotor to Hitec heights!

Energy Rotor ESCs Features:

  • BLHeli Firmware
  • Pre-set ONESHOT Synchronization
  • Wide RPM Motor Range Compatibility
  • New Generation MOSFETs for Increased Efficiency
  • Smooth, Linear Throttle Response
  • Fast Refresh Rate up to 600Hz

 

Model Part # Continuous / Burst Current Rating Battery / Cell Dimensions (in) Weight (oz)
Energy Rotor 12A 61071 12A / 20A 5-12N /

2-4Li

0.59 x 1.02 x 0.24 0.28
Energy Rotor 18A 61082 18A / 30A 5-12N /

2-4Li

0.47 x 0.87 x 0.17 0.19
Energy Rotor 20A 61072 20A / 30A 5-18N /

2-6Li

0.79 x 1.85 x 0.31 0.81
Energy Rotor 30A 61073 30A / 40A 5-18N /

2-6Li

0.79 x 1.85 x 0.31 0.71
Energy Rotor 40A 61074 40A / 50A 5-18N /

2-6Li

0.79 x 1.85 x 0.39 1.09
Energy Rotor 60A 61075 60A / 70A 5-18N /

2-6Li

1.18 x 2.17 x 0.51 1.76

 
Available Models:

  • Energy Rotor 12A | Single – Stock #61070; 4-Pack – Stock #61083
  • Energy Rotor 18A | Single – Stock #61082; 4-Pack – Stock #61084
  • Energy Rotor 20A | Single – Stock #61072; 4-Pack – Stock #61085
  • Energy Rotor 30A | Single – Stock #61073; 4-Pack – Stock #61086
  • Energy Rotor 40A | Single – Stock #61074; 4-Pack – Stock #61087
  • Energy Rotor 60A | Single – Stock #61075; 4-Pack – Stock #61088

Press Release: Hitec’s D-Series Dynamos

Hitec is proud to introduce our D-Series Dynamo Servos – the titanium gear D940TW, D945TW, D950TW & D980TW; the metal gear D625MW & D645MW and the waterproof, mega scale, IP-67 rated D840WP & D845WP! All Hitec D-Series servos have been designed using our brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with 3mm hex screw, each D-series servo brings monster performance never known before in the market.

PR-DSeries_TitaniumTeam

4.8 Volts 6.0 Volts 7.4 Volts
Model Speed Torque Speed Torque Speed Torque Part# Dimensions Weight
D940TW 0.11 sec/60º 139oz-in 0.08 sec/60º 187oz-in 0.07 sec/60º 229oz-in 36940 1.57 x 0.79 x 1.50 in 2.40 oz
10.0kg-cm 13.5kg-cm 16.5kg-cm 39.9 x 20.1 x 38.1 mm 68.0 g
D945TW 0.16 sec/60º 194oz-in 0.12 sec/60º 250oz-in 0.10 sec/60º 319oz-in 36945 1.57 x 0.79 x 1.50 in 2.40 oz
14.0kg-cm 18.0kg-cm 23.0kg-cm 39.9 x 20.1 x 38.1 mm 68.0 g
D950TW 0.23 sec/60º 292oz-in 0.17 sec/60º 403oz-in 0.14 sec/60º 486oz-in 36950 1.57 x 0.79 x 1.50 in 2.40 oz
21.0kg-cm 29.0kg-cm 35.0kg-cm 39.9 x 20.1 x 38.1 mm 68.0 g
D980TW 0.28 sec/60º 361oz-in 0.21 sec/60º 500oz-in 0.17 sec/60º 611oz-in 36980 1.72 x 0.88 x 1.57 in 2.76 oz
26.0kg-cm 36.0kg-cm 44.0kg-cm 43.7 x 22.4 x 39.9 mm 78.2 g

 


 

PR-DSeries_MetalMasters

4.8 Volts 6.0 Volts 7.4 Volts
Model Speed Torque Speed Torque Speed Torque Part# Dimensions Weight
D625MW 0.20 sec/60º 87oz-in 0.15 sec/60º 122oz-in 0.13 sec/60º 139oz-in 36625 1.59 x 0.77 x 1.48 in 2.11 oz
6.3kg-cm 8.8kg-cm 10.0kg-cm 40.6 x 19.8 x 37.8 mm 59.8 g
D645MW 0.28 sec/60º 115oz-in 0.20 sec/60º 158oz-in 0.17 sec/60º 180oz-in 36645 1.59 x 0.77 x 1.48 in 2.11 oz
8.3kg-cm 11.4kg-cm 13.0kg-cm 40.6 x 19.8 x 37.8 mm 59.8 g

 


 

PR-DSeries_WaterproofDuo

4.8 Volts 6.0 Volts 7.4 Volts
Model Speed Torque Speed Torque Speed Torque Part# Dimensions Weight
D840WP 0.17 sec/60º 264oz-in 0.14 sec/60º 333oz-in 0.11 sec/60º 417oz-in 36840 2.60 x 1.26 x 2.44 in 8.0 oz
19.0kg-cm 24.0kg-cm 30.0kg-cm 66.0 x 32.0 x 62.0 mm 227 g
D845WP 0.26 sec/60º 451oz-in 0.21 sec/60º 562oz-in 0.17 sec/60º 694oz-in 36845 2.60 x 1.26 x 2.44 in 8.0 oz
32.5kg-cm 40.5kg-cm 50.0kg-cm 66.0 x 32.0 x 62.0 mm 227 g

 


 

PR-DPC11

DPC-11 Features:

  • Customize the Parameters of Hitec’s Programmable DXXX, HSB-9XXX, HS-7XXX and
  • HS-5XXX Series Servos
  • Test Settings Prior to Servo Installation
  • Save and Load Servo Parameter Files and Restore the Factory Default Files with the DPC-11 Software
  • Download the DPC-11 Software to your PC

Race Report: Bring The Heat 2015

Team Hitec Brings The Heat!

Event: Bring The Heat @ FRC
Date: September 11-13, 2015
Location: Flowood RC Park – Flowood, MS
Team Hitec Attendees: Billy Tompkins, Adam Drake, Bill Shephard

By: Billy Tompkins
Flowood RC Park is an indoor RC racetrack in the small town of Flowood, Mississippi just outside of the state capital of Jackson. For the past 5 years, Flowood RC Park has been host to the annual 1/8th scale Nitro Offroad race where racers from all over the country flock to this small Mississippi town to vie for the “Bring The Heat Championship.

This year’s race would bring over 250 entries among 10 different classes. It was our first year attending Bring The Heat so we decided to bring our booth display to showcase our latest products including chargers, servos and our newest edition to our radio lineup, the Lynx 4S. Many of the drivers from this region had never been up close and personal with our gear so we had many visitors at the Hitec booth.

bring the heat booth

In attendance for the 5th year in a row was Team Hitec’s very own Adam Drake. Adam would compete in the coveted Pro Buggy class, as well as the Pro Truggy class. Louisiana local and Team Hitec Driver Bill Shephard participated in the race as well with great results. Together, these two class acts would bring home three podium finishes. After a 30 minute A main event, Bill Shephard went on to finish 2nd.  In the Pro Buggy Class, Adam Drake had a rough start to the 45-minute main event but he battled back with a solid 3rd place performance. In the Pro Truggy class, Adam looked to be in fine form as he led for the majority of the race and crossed the finish line with a commanding lead over the field. Both Adam and Bill used Hitec’s 9000 series servos and their Lynx 4S radio to take them to the podium!

bring the heat pro truggy

bring the heat adam and billIf you are ever in the Jackson, Mississippi area and looking for a place to race, look no further than Flowood R/C Park. The great staff and awesome facility play host to birthday parties, local club racing and larger regional events. Bubba Barham and his staff run a top notch facility…well worth a visit!

Firmware Update: Lynx 4S v1.03

FirmwareUpdate-Lynx4S-v1.03

 

HPP-22 VERSION 1.19(0) 7/17/2015

LYNX 4S ver. 1.03(0) Firmware Update (09/14/15)

  • Added functions
    • Now displays a warning message when changing Mix Type
    • LED can be turned “OFF” in the LED setup
    • Users can now select “SCREEN TYPE” for each model
    • User can set the “LED” color for each model
  • Improved Functions
    • Moved ”RF-SCAN” menu to the MANAGEMENT screen to avoid confusion
    • Saves the setup value on the Auxiliary (AUX) channel
  • Maintenance Fix
    • Fixed the update error bug

Press Release: HG3XA Gyro System

PR-HG3XA

 

Fly Right with Hitec’s HG3XA Gyro

Hitec is excited to introduce our compact HG3XA gyro for all your standard wing, delta wing and v-tail aircraft. This lightweight, three-axis gyro provides high performance stabilization, increased precision and smooth navigation in the most challenging flight conditions. The HG3XA gyro’s accurate angular motion detection will instantaneously improve your 3D performance, making hovers, torque rolls, harriers and knife edge passes easier to master. Three trimming potentiometers allow you to separately adjust the gyro gain of your aircraft’s aileron, elevator and rudder. Toggle between three different flight modes while your model is airborne: “off”, “standard” and “heading hold” mode. Our complete package includes the HG3XA gyro, connecting cables and adhesive mounting pads. Fly Right with Hitec!

HG3XA 3-Axis Stabilization Gyro System Specifications:

  • Voltage Range: 5 ~ 6V DC
  • PWM Output: 50Hz, or 20ms
  • PWM Signal: 1520 ± 500μs
  • Full Scale Range: 970 ~ 2070μs
  • Gyro Sample Rate: 1KHz
  • Operating Temperature: -40°C to 85°C
  • Dimensions: 1.85 x 1.30 x 0.55 in / 47.0 x 33.0 x 14.0 mm
  • Weight: 0.39 oz / 11.0 g

Press Release: HS-1100WP Ultra-Heavy Duty, Giant, Waterproof Servo

PR-HS1100WP

 

Giant Scale Servos, Watch Out!

Giant scale servos, watch out! There’s a new sheriff in town! Our HS-1100WP waterproof, heavy-duty digital giant brings out-of-this-world torque performance and strength to all your large scale vehicles, airplanes and robotic projects. Made with impressively durable steel gears, robust EMI-shielded cases and an IP-67* rated code for maximum underwater protection, this addition to our giant servo line has Hitec’s unrivaled industrial digital circuitry and engineering. Your world just got BIGGER with the introduction of the HS-1100WP!

HS-1100WP Features:

  • Non-programmable, Industrial Digital Circuitry
  • EMI-shielded Cases
  • *International Protection Code 67 Rating (6=Dust Tight; Complete Protection Against Contact 7) – Immersion up to 1 meter
  • Durable Steel Gears
  • 14.8V 2-Cell LiPo Capability
  • 5-Pole Carbon Brush

Specifications:

Motor Type: 5 Pole Carbon Brush
Bearing Type: Dual Ball Bearing
Speed (11.1V/14.8V): 0.26 / 0.19 seconds
Torque oz./in. (11.1V/14.8V): 1167 / 1528
Torque kg./cm. (11.1V/14.8V): 84 / 110
Size in Inches: 2.52 x 1.30 x 2.87
Size in Millimeters: 64 x 33 x 73
Weight oz.: 12.80
Weight g.: 363

Press Release: Optima SL Receiver

PR-OptimaSL

 

Hitec Expands the Optima Receiver Line!

We are pleased to introduce the full-range Optima SL receiver, specifically designed for flybarless system helicopters. With advanced telemetry capabilities and exceptional security, this receiver utilizes an S-Bus protocol for maximum compatibility, keeping you connected to your model like none other. The Optima SL is designed with a dual-BODA antenna, a supplementary power connection (SPC) and hold and fail-safe function, safeguarding your heli during the most complex and agile maneuvering. Reliability and control are yours with Hitec!

Optima SL Specifications:

  • One S-Bus Output and Eight PWM Channels
  • Dimensions: 1.89 x 1.12 x 0.60 in.
  • Weight: 0.78 oz.

Press Release: X2 AC Pro 2 Port AC/DC Multi-Charger

PR-X2ACPro-Blog

 
Expanding on the success and reliability of Hitec’s X2 AC Pro, we introduce its pumped-up brother, the X2 AC Plus! Our AC/DC dual port charger/discharger delivers 200 watts of total power in AC mode, and up to 300 watts total output in DC! Its versatile power distribution mode lets you optimize the output in AC mode for maximum charge efficiency. Additionally, the X2 AC Plus is equipped with a built-in heavy duty 60W soldering iron with adjustable operating temperatures from 400 to 840˚F (200-450℃), making it a convenient and handy feature at the field as well as at home. Easily store and recall 20 charge/discharge profiles. Capable of charging all battery chemistries, including the latest high voltage LiPo’s (LiHV), this all-in-one charger has advanced functions such as Battery Meter and Battery Internal Resistance Meter modes. For the ultimate convenience, you can also configure your settings and keep an eye on your charge progress with your Smartphone or PC! Charging gets better with Hitec!

X2 AC Plus Features:

  • Twin Channel Charger with Two Independent Circuits
  • Input Power Source: 11-18V DC (360W) or 100-240V AC
  • DC Mode Output; 200W Port A; 100W Port B; 300W Total Output Maximum
  • AC Mode Power Distribution Mode for Ultimate Flexibility; 200W Total Output
  • Example 1:
    Channel A – 150W, then Channel B – 50W for a Total 200W Power
    Example 2:
    Channel A – 100W, then Channel B – 100W for a Total 200W Power
  • Built-in Switching AC Power Supply
  • Includes 60W Soldering Iron, 400 to 840˚F (200-450℃)
  • USB support for PC and Wi-Fi Smart Phone Interface

Charging Specifications:

  • Charges NiMH, NiCd, LiPo, LiHV, LiFe, Li-Ion and Lead Acid Batteries
  • NiCd/NiMH Cell Count: 1-15 cells
  • LiPo/LiHV/Li-Ion/LiFe Cell Count: 1-6 cells
  • Pb voltage: 2-20 volts
  • Charge Current Range: 0.1-10.0 amps
  • Maximum Charge Output: AC 200W / DC 300W (200W + 100W)
  • 20 Programmable Profile Settings
  • Independent Cell Balancing Circuitry

 

Optional WiFi Module Features:

  • Compatible with the X2 AC Pro Charger
  • View, Change & Customize your X2 AC Pro Options via Smartphone
  • Supports Both iOS and Android Devices

Flight Report: Flite Fest 2015

FlightFest2015Cover


Fun For All Ages!

Event: Flite Fest 2015
Date: July 9-12, 2015
Location: Furey Flying Field – Malvern, OH
Team Hitec Attendees: Mike Mayberry, Shawn Spiker, Nick Frederick, Jason Cohen

By: Mike Mayberry

When some of the coolest people in the industry, and our close friends Josh, Alex and Austin from Flite Test decide to put on an event, they really do it right! Last year was the first annual Flite Fest and it was so incredible, we knew we had to attend again this summer. Acres upon acres of fun is the best way to describe it!

The Hitec crew included Team Manager Mike Mayberry, Sales Manager Shawn Spiker and Team Pilots Nick “Nacho” Frederick and our newest and youngest addition Jason “Hashbrown” Cohen. We arrived bright and early on Thursday morning…well it’s wasn’t that bright and ok fine,  not that early either but we made it and were ready to rock and roll!  And what better way to rock and roll than with the new Multiplex Rockstar biplane! We’ve had one of these planes for the past month and didn’t dare fly it, because we didn’t want any accidental mishaps (Mike’s colorful flying record and all) and find we had nothing to bring! If a crash would occur at Flite Fest, at least there would be an audience and a story to tell, right?

IMG_3903

We also brought other assorted models including the Speedy Dogfighter, Fun-to-fly Pilatus and easy-flying Shark to tear up the sky with! Let’s not forget all the cool Hitec gear too like the new Flash 7 & 8 radios along with the X2 AC+ charger!

After taking a walk around to check out the incredible facility which is, in fact, the personal property of the Furey’s (Austin’s folks,) we were in awe of the sheer size and beauty of the location and amazed at the size of the crowd that was already there! Two massive build tents were set up across from us with tables and chairs filled with people building the cool Flite Test foam kits and more. Pop up tents seemed to span for miles down the flight line in either direction! Our 20×20 tent was situated close to Show Central which was perfect! Once we got the tables, banners, flags and product all set up and were ready to go out and fly, the skies opened and we spent the rest of the afternoon under the tent! Oh well…we had lots of visitors and got to show off our stuff which is what we were there for anyway! Unfortunately, the rain didn’t let up, becoming increasingly heavier. Throw in a Tornado warning and the evening was shaping up to be something Jim Cantore would report on. We decided at some point to head out to dinner but Mother Nature had turned the dirt field into a mud bog and our front tires were just spinning and flinging mud everywhere. Alas, with the help of a few strong gentleman and Shawn’s foot on the gas, the four of us pushed and managed to get the car out and onto the asphalt driveway! Done for the day, we headed out and hoped we’d have better luck with the weather on Friday!

Friday morning came and while it wasn’t really raining that hard, it was still drizzling and when we got to the field, we realized that Flite Fest had turned into Mud Fest! The Flite test crew and volunteers were quick to respond and soon there were scores of people with hay in hand spreading it over the really wet and muddy areas! The rain finally stopped around noon and we could finally get out and fly! And fly we did!!!! We put several flights in on the Dogfighter, Heron, Shark and Pilatus but were still saving the Rockstar for Saturday when it was supposed to be sunny!

IMG_3891

We awoke Saturday to glorious weather and a packed field full of happy modelers! Today was the day for the Rockstar! We moved to an area of the flight line that wasn’t as crowded. It was pretty crazy out there! Team Pilot Nick was given the honors of taking it up for a shakedown flight. I have to say that the Rockstar is one sexy beast! We did a final preflight check and with a thumbs up, Nick punched the throttle and off it went! The role out was short and jumped into the air, climbing out like a homesick angel! A couple clicks of the trim switches on our Flash 8 and it was tracking straight as an arrow. Wow…this plane looked even better in the air than on the ground! The plane was responsive so Nick dropped the rates to low and did some nice graceful turns and rolls. He brought it down a little lower into a high alpha harrier…there was a little wing rock but not too bad! Then as all good pilots would do, he pops it up into a hover…NICE! A little wobbly at first but then it locked in and he punched the throttle and it climbed right out…plenty of power Nick proclaimed! Time to set up for landing…nice approach and as it settled down on to the grass, Nick held a little up elevator to keep the tail down and….The grass was a bit too tall and over the Rockstar flipped onto its lid! Oh well…it can’t always be perfect! Needless to say we were all very pleased with the performance of the models and we managed to get in a half a dozen more flights throughout the day. The Rockstar definitely lived up to its name!

P1090160

Some of the most fun we had was competing in the “Combat” events! We actually lost more planes when normal flying than when there were 60 planes in the sky all trying to hit each other! Seems to me, when there are dozens of planes flying all over, you don’t hit a soul; but when a handful of planes are in the air, they suddenly have magnets attached to them!!

IMG_3962

As day turned to dusk, the lights came out and we enjoyed a glorious sunset and painted sky! What a fitting display for a fantastic event that was put on by a great group of guys and volunteers. I think the final tally for pilots was somewhere north of 900! Are you kidding me?!?!? Next to the granddaddy of them all, Joe Nall, this was probably the biggest aircraft event in the country. It was definitely worth the trip out to Ohio to be a part of it! We met hundreds of great people, destroyed a few planes and made some new friends in the process…what more could you ask for?!?!

A special thanks to our good friends, Josh, Alex and Austin at Flite Test for putting on such a great event and for taking such good care of us! It’s always great to see and hang out with these guys and this time was really special! We’re looking forward to next year! See you next time!!!

– Team Hitec

Press Release: HSR-2645CR Robot Servo

PR-HSR2645CR

 

The New Continuous Rotation Robot Servo

Expanding on the durable and responsive power of the HSR-1425CR continuous rotation servo, we have developed the digital HSR-2645CR. This non-proportional, continuous rotation servo delivers the commanding force you require, with intense, powerful torque, wide voltage capability and Hitec’s impressive metal gear train. Responsive high speed motion and quick directional shifts make this the go-to servo for your most complex and specialized applications. Its programmability and “all-in” solid build will have radio control, robotic and engineering enthusiasts cheering. Continuous performance by Hitec!

HSR-2645CR Specifications:

  • Programmable Digital Circuit
  • Linear Speed Control
  • Quick Directional Shift
  • Low Dead Band for Precise Control
  • Wide Input Voltage Range

 

4.8 Volts 6.0 Volts 7.4 Volts
Model Speed Torque Speed Torque Speed Torque Part# Dimensions Weight
HSR-2645CR 46 RPM 111oz-in 58 RPM 139oz-in 72 RPM 167oz-in 32645CR 1.59 x 0.77 x 1.48 in 1.87 oz
8kg-cm 10kg-cm 12kg-cm 40.6 x 19.8 x 37.8 mm 53 g