Team Hitec Announces Scott Bauerschmidt as Team Ambassador

Posted on June 17, 2020 by hitec

Hitec has always taken pride in having a talented and accomplished team of pilots who proudly represent our brand and our products nationwide. In an effort to expand and enhance our Team Program even further, we have solicited the skills of a longtime Hitec supporter, Scott Bauerschmidt. Scott has been involved in the radio control industry for many years, starting out as a helicopter pilot before transitioning to 3D airplanes. We welcome him as our National Team Ambassador and are rolling out a new tiered pilot structure that will be outlined soon.

Welcome Scott!

Scott Bauerschmidt – “In His Own Words”- – an RC Biography

I have been in this hobby for many years, I started off flying helicopters. After many years flying helicopters, I switched to airplanes and have been flying planes ever since. I love this hobby!! Getting out and meeting such great people from all walks of life. Having the chance to be around and learn from some of the most knowledgeable people in the hobby has afforded me the chance to learn and advance quickly. I love giving back to the people, I always spend time helping others first. I love going to events all over the country, I also love promoting events just as much. I’ve promoted events like the AJ-Aircraft Fly-In and was responsible for bringing back the 2019 ETOC. I have also been the President of the Toledo Weak Signals for the last 4 years, which for those of you that don’t know; this is the club that puts on the largest RC Expo every year for the past 66 Years. This is where I was lucky enough to meet the Jesky family, as they were members of the club. I owe a lot of my experience to Andrew, Tim, Joe and Linda. The Jesky’s have welcomed me into their family in a sense as a third child. I was more than lucky enough to be on the ground floor when AJ Aircraft was born. I have been helping ever since. I am currently the AJ Aircraft Marketing manager or as Tim would say the Assistant Chief Bologna slicer. I am also a Team Pilot for AJ Aircraft as well as Hitec. I am more than excited to join the Hitec team as the National Team Manager, Hitec and I really look forward to the 2020 year as we look to greatly improve an already great team.

Press Release: X2 700 – AC/DC Multicharger

Posted on December 17, 2015 by hitec

Hitec’s powerful X2-700 Multicharger is the sophisticated charging choice for all your high amperage batteries. This DC powerhouse features two 700-watt output ports for increased capacity and supports all battery chemistries, including the latest LiHV cells. The microprocessor control and an internal resistance meter make this the star at the workshop, flying field and track. Hitec’s free “Charge Master” software allows full PC control of the X2-700 through its integrated USB port from basic setup to full software analysis of your battery’s health and performance. Streamline your operations with the new Synchronous Mode as the second output port automatically mirrors your channel one settings to charge multiple similar batteries with minimal setup time. Reliable and durable, this is a must-have charger for all seasoned hobbyists.

X2 700 Features:

Twin Channel Charger with Two Independent Circuits
Input Power Source: 11-30V DC
DC Mode Output: 700W Port A; 700W Port B.
Total Maximum Output: 1400W
“Charge Master” Software for PC Interface
Synchronous Mode for Setting Both Charge Channels thru Channel One

Charging Specifications:

DC Input Voltage: 11 – 30 Volts DC
Total Charge Circuit Power: 1400 Watts (700 Watts x 2)
Charge Current Range: 0.1 – 30.0 Amps x 2
Discharge Current Power: 30 Watts x 2
Discharge Current Range: 0.1 – 5.0 Amps
Current Drain for LiPo Balancing: Max 800mAh per cell
NiCd/NiMh Battery Cell Count: 1 – 20 cells
– Capacity Range 100 – 50,000mAh
LiPo/LiHV/LiFe/LiIon Cell Count: 2 – 8 cells
– Capacity Range 100 – 50,000mAh
Pb Battery Voltage: 2 – 24 Volts
– Capacity Range 100 – 50,000mAh
New Weight: 2.69 lbs. (1220g)
Dimensions: 7.9 x 5.5 x 2.2 in. (200 x 140 x 55mm)

Available Model:

X2 700 – AC/DC Multicharger | Stock# 44239

Team Hitec Dominates the 2015 JBRL Series

Posted on November 17, 2015 by hitec

The 2015 Jimmy Babcock Racing League, also known as the JBRL, has finally come to a close. After battling at 8 different tracks throughout the Southwestern United States, Hitec’s very own Adam Drake finished on the top step overall in Pro Buggy, Pro Truggy, and 1/8th Electric.

Armed with his Hitec Lynx 4S and the brushless HSB-9370/9380 servos, he made Hitec proud once again! Honorable Mention went to Hitec’s Steve Harris for finishing in the top 3 overall in Pro Buggy and 1/8th Electric.

Representing the “over 40 year old” racers, Hitec’s Miguel Perez finished 2nd overall in the 40+ class while Hitec’s Don Vinkemulder finished 3^rd.

Congratulations!! Great Job Everyone!

Press Release: X1 mini – AC Input Balance Charger/Discharger

Posted on November 13, 2015 by hitec

Hitec’s latest unbeatable battery charger is the new X1 mini. It is the perfect affordable answer for beginner hobbyists as well as an excellent addition to the experienced RC enthusiasts’ charger collection. Featuring a compact design for maximum portability and convenience, the reliable X1 mini delivers 60 watts of power and capably charges all battery chemistries, including the new generation LiHV. Its 6-amp power supply and user-friendly software will keep you fully charged and ready, both in the workshop and on the go!

X1 mini Features:

Compact Size and Stylish Design
Battery Meter
Battery Internal Resistance Meter
PC Communications: USB Port for PC Control & Firmware Upgrade
Re-Peak Mode for NiMH/NiCd Batteries
Charger Protection: Over Temperature, Over Capacity & Over Short Circuit Reverse Polarity

Charging Specifications:

AC Input: 100-240 Volts AC
Total Charge Circuit Power: 60 Watts AC Input
Charge Current Range: 0.1 – 6.0 Amps
Discharge Current Range: 0.1 – 2.0 Amps
Discharge Current Power: 10 Watts
Charges NiMH, NiCd, LiPo, LiHV, LiFe, Li-Ion and Lead Acid Batteries
NiCd/NiMH Cell Count: 6-8 Cells
LiPo/LiHV/Li-Ion/LiFe Cell Count: 2-4 Cells
Pb Voltage: 6-12 Volts
Net Weight: 0.68 lbs (310g)
Dimensions: 4.41 x 4.17 x 2.05in (112 x 106 x 52mm)

Available Model:

X1 mini Charger | Stock# 44241

Press Release: Energy Rotor Brushless ESCs

Posted on October 28, 2015 by hitec

Take Your Multirotor to New Heights

Designed specifically for multirotors, Hitec’s new ENERGY ROTOR speed controls possess the same reliability and quality you have come to expect throughout our entire ENERGY SPORT product line. These must-have brushless controllers provide smooth and accurate throttle linearity for all your flights. Flashed with the pilot-preferred BLHeli firmware and utilizing ONESHOT synchronized communication with your flight controller, the ENERGY ROTOR speed controls achieve lightning-fast response and interaction with your model. Propel your rotor to Hitec heights!

Energy Rotor ESCs Features:

BLHeli Firmware
Pre-set ONESHOT Synchronization
Wide RPM Motor Range Compatibility
New Generation MOSFETs for Increased Efficiency
Smooth, Linear Throttle Response
Fast Refresh Rate up to 600Hz

Model	Part #	Continuous / Burst Current Rating	Battery / Cell	Dimensions (in)	Weight (oz)
Energy Rotor 12A	61071	12A / 20A	5-12N / 2-4Li	0.59 x 1.02 x 0.24	0.28
Energy Rotor 18A	61082	18A / 30A	5-12N / 2-4Li	0.47 x 0.87 x 0.17	0.19
Energy Rotor 20A	61072	20A / 30A	5-18N / 2-6Li	0.79 x 1.85 x 0.31	0.81
Energy Rotor 30A	61073	30A / 40A	5-18N / 2-6Li	0.79 x 1.85 x 0.31	0.71
Energy Rotor 40A	61074	40A / 50A	5-18N / 2-6Li	0.79 x 1.85 x 0.39	1.09
Energy Rotor 60A	61075	60A / 70A	5-18N / 2-6Li	1.18 x 2.17 x 0.51	1.76

Available Models:

Energy Rotor 12A | Single – Stock #61070; 4-Pack – Stock #61083
Energy Rotor 18A | Single – Stock #61082; 4-Pack – Stock #61084
Energy Rotor 20A | Single – Stock #61072; 4-Pack – Stock #61085
Energy Rotor 30A | Single – Stock #61073; 4-Pack – Stock #61086
Energy Rotor 40A | Single – Stock #61074; 4-Pack – Stock #61087
Energy Rotor 60A | Single – Stock #61075; 4-Pack – Stock #61088

Press Release: Hitec’s D-Series Dynamos

Posted on October 2, 2015 by hitec

Hitec is proud to introduce our D-Series Dynamo Servos – the titanium gear D940TW, D945TW, D950TW & D980TW; the metal gear D625MW & D645MW and the waterproof, mega scale, IP-67 rated D840WP & D845WP! All Hitec D-Series servos have been designed using our brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with 3mm hex screw, each D-series servo brings monster performance never known before in the market.

	4.8 Volts		6.0 Volts		7.4 Volts
Model	Speed	Torque	Speed	Torque	Speed	Torque	Part#	Dimensions	Weight
D940TW	0.11 sec/60º	139oz-in	0.08 sec/60º	187oz-in	0.07 sec/60º	229oz-in	36940	1.57 x 0.79 x 1.50 in	2.40 oz
		10.0kg-cm		13.5kg-cm		16.5kg-cm		39.9 x 20.1 x 38.1 mm	68.0 g
D945TW	0.16 sec/60º	194oz-in	0.12 sec/60º	250oz-in	0.10 sec/60º	319oz-in	36945	1.57 x 0.79 x 1.50 in	2.40 oz
		14.0kg-cm		18.0kg-cm		23.0kg-cm		39.9 x 20.1 x 38.1 mm	68.0 g
D950TW	0.23 sec/60º	292oz-in	0.17 sec/60º	403oz-in	0.14 sec/60º	486oz-in	36950	1.57 x 0.79 x 1.50 in	2.40 oz
		21.0kg-cm		29.0kg-cm		35.0kg-cm		39.9 x 20.1 x 38.1 mm	68.0 g
D980TW	0.28 sec/60º	361oz-in	0.21 sec/60º	500oz-in	0.17 sec/60º	611oz-in	36980	1.72 x 0.88 x 1.57 in	2.76 oz
		26.0kg-cm		36.0kg-cm		44.0kg-cm		43.7 x 22.4 x 39.9 mm	78.2 g

	4.8 Volts		6.0 Volts		7.4 Volts
Model	Speed	Torque	Speed	Torque	Speed	Torque	Part#	Dimensions	Weight
D625MW	0.20 sec/60º	87oz-in	0.15 sec/60º	122oz-in	0.13 sec/60º	139oz-in	36625	1.59 x 0.77 x 1.48 in	2.11 oz
		6.3kg-cm		8.8kg-cm		10.0kg-cm		40.6 x 19.8 x 37.8 mm	59.8 g
D645MW	0.28 sec/60º	115oz-in	0.20 sec/60º	158oz-in	0.17 sec/60º	180oz-in	36645	1.59 x 0.77 x 1.48 in	2.11 oz
		8.3kg-cm		11.4kg-cm		13.0kg-cm		40.6 x 19.8 x 37.8 mm	59.8 g

	4.8 Volts		6.0 Volts		7.4 Volts
Model	Speed	Torque	Speed	Torque	Speed	Torque	Part#	Dimensions	Weight
D840WP	0.17 sec/60º	264oz-in	0.14 sec/60º	333oz-in	0.11 sec/60º	417oz-in	36840	2.60 x 1.26 x 2.44 in	8.0 oz
		19.0kg-cm		24.0kg-cm		30.0kg-cm		66.0 x 32.0 x 62.0 mm	227 g
D845WP	0.26 sec/60º	451oz-in	0.21 sec/60º	562oz-in	0.17 sec/60º	694oz-in	36845	2.60 x 1.26 x 2.44 in	8.0 oz
		32.5kg-cm		40.5kg-cm		50.0kg-cm		66.0 x 32.0 x 62.0 mm	227 g

DPC-11 Features:

Customize the Parameters of Hitec’s Programmable DXXX, HSB-9XXX, HS-7XXX and
HS-5XXX Series Servos
Test Settings Prior to Servo Installation
Save and Load Servo Parameter Files and Restore the Factory Default Files with the DPC-11 Software
Download the DPC-11 Software to your PC

Race Report: Bring The Heat 2015

Posted on September 18, 2015 by hitec

Team Hitec Brings The Heat!

Event: Bring The Heat @ FRC
Date: September 11-13, 2015
Location: Flowood RC Park – Flowood, MS
Team Hitec Attendees: Billy Tompkins, Adam Drake, Bill Shephard

By: Billy Tompkins
Flowood RC Park is an indoor RC racetrack in the small town of Flowood, Mississippi just outside of the state capital of Jackson. For the past 5 years, Flowood RC Park has been host to the annual 1/8th scale Nitro Offroad race where racers from all over the country flock to this small Mississippi town to vie for the “Bring The Heat Championship.

This year’s race would bring over 250 entries among 10 different classes. It was our first year attending Bring The Heat so we decided to bring our booth display to showcase our latest products including chargers, servos and our newest edition to our radio lineup, the Lynx 4S. Many of the drivers from this region had never been up close and personal with our gear so we had many visitors at the Hitec booth.

In attendance for the 5^th year in a row was Team Hitec’s very own Adam Drake. Adam would compete in the coveted Pro Buggy class, as well as the Pro Truggy class. Louisiana local and Team Hitec Driver Bill Shephard participated in the race as well with great results. Together, these two class acts would bring home three podium finishes. After a 30 minute A main event, Bill Shephard went on to finish 2nd. In the Pro Buggy Class, Adam Drake had a rough start to the 45-minute main event but he battled back with a solid 3rd place performance. In the Pro Truggy class, Adam looked to be in fine form as he led for the majority of the race and crossed the finish line with a commanding lead over the field. Both Adam and Bill used Hitec’s 9000 series servos and their Lynx 4S radio to take them to the podium!

If you are ever in the Jackson, Mississippi area and looking for a place to race, look no further than Flowood R/C Park. The great staff and awesome facility play host to birthday parties, local club racing and larger regional events. Bubba Barham and his staff run a top notch facility…well worth a visit!

Firmware Update: Lynx 4S v1.03

Posted on September 15, 2015 by hitec

HPP-22 VERSION 1.19(0) 7/17/2015

LYNX 4S ver. 1.03(0) Firmware Update (09/14/15)

Added functions
- Now displays a warning message when changing Mix Type
- LED can be turned “OFF” in the LED setup
- Users can now select “SCREEN TYPE” for each model
- User can set the “LED” color for each model

Improved Functions
- Moved ”RF-SCAN” menu to the MANAGEMENT screen to avoid confusion
- Saves the setup value on the Auxiliary (AUX) channel

Maintenance Fix
- Fixed the update error bug

Press Release: HG3XA Gyro System

Posted on September 10, 2015 by hitec

Fly Right with Hitec’s HG3XA Gyro

Hitec is excited to introduce our compact HG3XA gyro for all your standard wing, delta wing and v-tail aircraft. This lightweight, three-axis gyro provides high performance stabilization, increased precision and smooth navigation in the most challenging flight conditions. The HG3XA gyro’s accurate angular motion detection will instantaneously improve your 3D performance, making hovers, torque rolls, harriers and knife edge passes easier to master. Three trimming potentiometers allow you to separately adjust the gyro gain of your aircraft’s aileron, elevator and rudder. Toggle between three different flight modes while your model is airborne: “off”, “standard” and “heading hold” mode. Our complete package includes the HG3XA gyro, connecting cables and adhesive mounting pads. Fly Right with Hitec!

HG3XA 3-Axis Stabilization Gyro System Specifications:

Voltage Range: 5 ~ 6V DC
PWM Output: 50Hz, or 20ms
PWM Signal: 1520 ± 500μs
Full Scale Range: 970 ~ 2070μs
Gyro Sample Rate: 1KHz
Operating Temperature: -40°C to 85°C
Dimensions: 1.85 x 1.30 x 0.55 in / 47.0 x 33.0 x 14.0 mm
Weight: 0.39 oz / 11.0 g

Press Release: HS-1100WP Ultra-Heavy Duty, Giant, Waterproof Servo

Posted on August 21, 2015 by hitec

Giant Scale Servos, Watch Out!

Giant scale servos, watch out! There’s a new sheriff in town! Our HS-1100WP waterproof, heavy-duty digital giant brings out-of-this-world torque performance and strength to all your large scale vehicles, airplanes and robotic projects. Made with impressively durable steel gears, robust EMI-shielded cases and an IP-67* rated code for maximum underwater protection, this addition to our giant servo line has Hitec’s unrivaled industrial digital circuitry and engineering. Your world just got BIGGER with the introduction of the HS-1100WP!

HS-1100WP Features:

Non-programmable, Industrial Digital Circuitry
EMI-shielded Cases
*International Protection Code 67 Rating (6=Dust Tight; Complete Protection Against Contact 7) – Immersion up to 1 meter
Durable Steel Gears
14.8V 2-Cell LiPo Capability
5-Pole Carbon Brush

Specifications:

Motor Type:	5 Pole Carbon Brush
Bearing Type:	Dual Ball Bearing
Speed (11.1V/14.8V):	0.26 / 0.19 seconds
Torque oz./in. (11.1V/14.8V):	1167 / 1528
Torque kg./cm. (11.1V/14.8V):	84 / 110
Size in Inches:	2.52 x 1.30 x 2.87
Size in Millimeters:	64 x 33 x 73
Weight oz.:	12.80
Weight g.:	363