Upgrade to the D-Series Servo Line
Our engineers have worked diligently throughout the past year, producing our enhanced, high-performance D-Series. Designed with upgraded features and extreme reliability, this servo line successfully replaces a plethora of your past favorites. Check out the chart pictured below for a quick reference to your D-Series replacements.
Key Features:
- Programmable PWM Digital Amplifier
- 32-Bit MCU with 12-Bit ADC Circuitry
- Ultra Precise 4096 Resolution
- 1M Cycle Long Life Potentiometer
- Wide Operating Voltage (4.8 ~ 8.4* Volts DC)
- Dual Ball Bearing Supported Output Shaft
- 25-Tooth Output Spline
- Soft-Start Enabled Circuitry for Smooth Power Up
UPGRADEABLE D-SERIES SERVOS | |
Previous Servos | Upgraded To |
HS-5085MG | D85MG |
HS-5485HB | D485HW |
HS-5495BH | D485HW |
HS-5625MG | D625MW |
HS-5665MH | D625MW |
HS-5645MG | D645MW |
HS-5685MH | D645MW |
HS-5646WP | D646WP |
HS-7775MG | D777MG |
HS-7940TH | D940TW |
HS-7945TH | D945TW |
HS-7950TH | D950TW |
HS-7954SH | D954SW |
HS-7955TG | D955TW |
HS-7980TH | D980TW |
HS-646WP | D956WP |
Highlights of the D-Series
For Further questions/comments/concerns, please contact our Service Department below:
---------------------------------------------------------------------------------
Hitec RCD USA Hours of Operation
Monday - Friday 8:00 am to 4:30 pm PST
* Hitec / Multiplex USA is closed on most US Holidays.
Phone: (858)748-6948
FAX: (858)748-1767
Email: service@hitecrcd.com
________________________________________________
*D85MG operatng range is 4.8 ~ 6.0 Volts DC