Monthly Archives: October 2015

Press Release: Energy Rotor Brushless ESCs

Posted on by

PR-EnergyRotorESCs

 

Take Your Multirotor to New Heights

Designed specifically for multirotors, Hitec’s new ENERGY ROTOR speed controls possess the same reliability and quality you have come to expect throughout our entire ENERGY SPORT product line. These must-have brushless controllers provide smooth and accurate throttle linearity for all your flights. Flashed with the pilot-preferred BLHeli firmware and utilizing ONESHOT synchronized communication with your flight controller, the ENERGY ROTOR speed controls achieve lightning-fast response and interaction with your model. Propel your rotor to Hitec heights!

Energy Rotor ESCs Features:

  • BLHeli Firmware
  • Pre-set ONESHOT Synchronization
  • Wide RPM Motor Range Compatibility
  • New Generation MOSFETs for Increased Efficiency
  • Smooth, Linear Throttle Response
  • Fast Refresh Rate up to 600Hz

 

Model Part # Continuous / Burst Current Rating Battery / Cell Dimensions (in) Weight (oz)
Energy Rotor 12A 61071 12A / 20A 5-12N /

2-4Li

 0.59 x 1.02 x 0.24 0.28
Energy Rotor 18A 61082 18A / 30A 5-12N /

2-4Li

 0.47 x 0.87 x 0.17 0.19
Energy Rotor 20A 61072 20A / 30A 5-18N /

2-6Li

 0.79 x 1.85 x 0.31 0.81
Energy Rotor 30A 61073 30A / 40A 5-18N /

2-6Li

 0.79 x 1.85 x 0.31 0.71
Energy Rotor 40A 61074 40A / 50A 5-18N /

2-6Li

 0.79 x 1.85 x 0.39 1.09
Energy Rotor 60A 61075 60A / 70A 5-18N /

2-6Li

 1.18 x 2.17 x 0.51 1.76

 
Available Models:

  • Energy Rotor 12A | Single – Stock #61070; 4-Pack – Stock #61083
  • Energy Rotor 18A | Single – Stock #61082; 4-Pack – Stock #61084
  • Energy Rotor 20A | Single – Stock #61072; 4-Pack – Stock #61085
  • Energy Rotor 30A | Single – Stock #61073; 4-Pack – Stock #61086
  • Energy Rotor 40A | Single – Stock #61074; 4-Pack – Stock #61087
  • Energy Rotor 60A | Single – Stock #61075; 4-Pack – Stock #61088

Press Release: Hitec’s D-Series Dynamos

Posted on by

Hitec is proud to introduce our D-Series Dynamo Servos – the titanium gear D940TW, D945TW, D950TW & D980TW; the metal gear D625MW & D645MW and the waterproof, mega scale, IP-67 rated D840WP & D845WP! All Hitec D-Series servos have been designed using our brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with 3mm hex screw, each D-series servo brings monster performance never known before in the market.

PR-DSeries_TitaniumTeam

4.8 Volts 6.0 Volts 7.4 Volts
Model Speed Torque Speed Torque Speed Torque Part# Dimensions Weight
D940TW 0.11 sec/60º 139oz-in 0.08 sec/60º 187oz-in 0.07 sec/60º 229oz-in 36940 1.57 x 0.79 x 1.50 in 2.40 oz
10.0kg-cm 13.5kg-cm 16.5kg-cm 39.9 x 20.1 x 38.1 mm 68.0 g
D945TW 0.16 sec/60º 194oz-in 0.12 sec/60º 250oz-in 0.10 sec/60º 319oz-in 36945 1.57 x 0.79 x 1.50 in 2.40 oz
14.0kg-cm 18.0kg-cm 23.0kg-cm 39.9 x 20.1 x 38.1 mm 68.0 g
D950TW 0.23 sec/60º 292oz-in 0.17 sec/60º 403oz-in 0.14 sec/60º 486oz-in 36950 1.57 x 0.79 x 1.50 in 2.40 oz
21.0kg-cm 29.0kg-cm 35.0kg-cm 39.9 x 20.1 x 38.1 mm 68.0 g
D980TW 0.28 sec/60º 361oz-in 0.21 sec/60º 500oz-in 0.17 sec/60º 611oz-in 36980 1.72 x 0.88 x 1.57 in 2.76 oz
26.0kg-cm 36.0kg-cm 44.0kg-cm 43.7 x 22.4 x 39.9 mm 78.2 g

 

 

PR-DSeries_MetalMasters

4.8 Volts 6.0 Volts 7.4 Volts
Model Speed Torque Speed Torque Speed Torque Part# Dimensions Weight
D625MW 0.20 sec/60º 87oz-in 0.15 sec/60º 122oz-in 0.13 sec/60º 139oz-in 36625 1.59 x 0.77 x 1.48 in 2.11 oz
6.3kg-cm 8.8kg-cm 10.0kg-cm 40.6 x 19.8 x 37.8 mm 59.8 g
D645MW 0.28 sec/60º 115oz-in 0.20 sec/60º 158oz-in 0.17 sec/60º 180oz-in 36645 1.59 x 0.77 x 1.48 in 2.11 oz
8.3kg-cm 11.4kg-cm 13.0kg-cm 40.6 x 19.8 x 37.8 mm 59.8 g

 

 

PR-DSeries_WaterproofDuo

4.8 Volts 6.0 Volts 7.4 Volts
Model Speed Torque Speed Torque Speed Torque Part# Dimensions Weight
D840WP 0.17 sec/60º 264oz-in 0.14 sec/60º 333oz-in 0.11 sec/60º 417oz-in 36840 2.60 x 1.26 x 2.44 in 8.0 oz
19.0kg-cm 24.0kg-cm 30.0kg-cm 66.0 x 32.0 x 62.0 mm 227 g
D845WP 0.26 sec/60º 451oz-in 0.21 sec/60º 562oz-in 0.17 sec/60º 694oz-in 36845 2.60 x 1.26 x 2.44 in 8.0 oz
32.5kg-cm 40.5kg-cm 50.0kg-cm 66.0 x 32.0 x 62.0 mm 227 g

 

 

PR-DPC11

DPC-11 Features:

  • Customize the Parameters of Hitec’s Programmable DXXX, HSB-9XXX, HS-7XXX and
  • HS-5XXX Series Servos
  • Test Settings Prior to Servo Installation
  • Save and Load Servo Parameter Files and Restore the Factory Default Files with the DPC-11 Software
  • Download the DPC-11 Software to your PC