*HITEC WILL BE CLOSED 5/27/24 TO OBSERVE MEMORIAL DAY*

Customer Service: M-F/ 8a-4:30p PST

(858) 748-6948 service@hitecrcd.com
(858) 748-6948 service@hitecrcd.com

Software Downloads

Servo Programmers

DPC-11 Installation instructions and Software (v2.9.9)

DPC-11 Driver Installation with Windows® 10/64 20H2 Troubleshooting – May, 19 2021
**OCTOBER 2020 UPDATE: Windows® 10/64 20H2 has been known to have issues with the DPC-11 driver installation. If your DPC-11 does not connect to your PC, perform the following instructions to correct the issue:

  1. Go to Windows Settings and select 'Update and Security'
  2. Select 'View Optional Updates' on the Windows Update page.
  3. On the Optional Updates page select the 'Drivers Update' drop down.
  4. Download and install the Silicon Labs Driver update for USBXpress.

Your DPC-11 should now connect to your PC.


How To Enable .NET Framework 2.0 and 3.5 in Windows

If the promt above appears, please follow these steps for troubleshooting assistance:

  1. From the Windows desktop, type Control Panel in the search box in the lower right and then select Control Panel.
  2. From the Control Panel, click Programs and Features.
  3. When the Programs and Features window comes up, click Turn Windows Features On or Off.
  4. Then check .NET Framework 3.5 (includes .NET 2.0 and 3.0) and click OK.
  5. Next, you’ll need to download files from Windows Update.
  6. Wait while the previous versions of .NET Framework are downloaded and installed.
  7. A restart might be required.

--------------------


DPC-10 
Brushless Servo PC Programming Interface

Windows® XP and 32bit Versions of Windows® 7, 8 or 8.1 - Installation instructions | Software
64-bit versions of Windows® 7, 8 or 8.1 - Installation instructions | Software

Digital Servo Programmers
HPP-21 & HPP-21 PLUS 

 



Chargers

 

Hitec Link Power X Bluetooth Control App:
RDX2 Pro, X2 AC+ Black Edition and X4 AC Pro* Chargers

iOS | Android

*NOTE: X4 AC Pro requires firmware version 1.09

Hitec Connect WiFi Control App:
X2 AC Plus & X2 AC Pro Chargers*

iOS | Android

*NOTE: WiFi Module Required

 

Hitec X Series Charger Monitoring Software*

Charger Monitor

*For use with chargers with internal USB output

--------------------

 

 

Hitec Charge Master Software 1.07 for select RDX Series Chargers*

Charge Master V1.07 ** (February 2024)

  • Applicable for the following chargers:
    • RDX4
    • RDX2 1000
    • RDX2 800
    • RDX2 200
    • AD350

 

Hitec Charge Master Software 2.03 for RDX Series and One Channel X Series Chargers*

Charge Master V2.03 **

  • Applicable for the following chargers:
    • RDX1
    • RDX1 Pro
    • X1 Mini
    • X1 Pro
    • X2 700 (one side at a time only)

 

Hitec Charge Master Software 3.02 for RDX Series and Two Channel X2 Series Chargers*

Charge Master V3.02 **

  • Applicable for the following chargers:
    • X2 AC Plus Black Edition
    • X2 AC Plus
    • X2 AC Pro

 

Hitec Charge Master Software 4.02 for RDX Series and Four Channel X4 Series Chargers*

Charge Master V4.02 **

  • Applicable for the following chargers:
    • X4 AC Pro

*For use with chargers with internal USB output
**Note: To program and save presets in Windows 10, you must run this software as administrator.

 



Radios & Receivers

 

Hitec 2.4GHz AFHSS Equipment Interface
HPP-22

 

Playlist Maker
Lynx 4S



Multirotors

 

Vektor 280
Open Pilot GCS Addendum | Vehicle Template