D-980TW 32-Bit, Monster Torque, Titanium Gear Servo

Part No: 36980

Product Description

The titanium D-980TW is part of our D-Series servo line. All Hitec D-Series servos have been designed using our brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with 3mm hex screw, each D-Series servo brings monster performance never known before in the market.

Features

  • Programmable PWM Digital Amplifier
  • 32-Bit MCU with 12-Bit ADC Circuitry
  • 4096 Resolution
  • 1M Cycle Long Life Potentiometer
  • Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
  • Dual Ball Bearing Supported Output Shaft
  • 25-Tooth Output Spline
  • Coreless Metal Brush Motors
  • Nylon Reinforced Plastic Upper and Lower Case
  • Diamond Cut Aluminum Heat Sink Center Case
  • Dust Resistant and Splash Proof Case

Programmable Functions

  • End Point Adjustments
  • Direction
  • Fail Safe
  • Dead Band
  • Speed (Slower)
  • Soft Start Rate
  • Overload Protection
  • Data Save / Load
  • Program Reset

Accessories

  • Titanium Gears Set | Link |
  • Metal / Karbonite 1st Gear Set | Link |
  • Plastic / Aluminum Case Set | Link |
  • Applicable Horns | Link 12 • 345 |


D980TW Servo Specifications

Performance Specifications
Operating Voltage Range (Volts DC) 4.8V ~ 6.0V ~ 7.4V
Speed (Second @ 60°) 0.28 ~ 0.21 ~ 0.17
Maximum Torque Range oz. / in. 361 ~ 500 ~ 611
Maximum Torque Range kg. / cm. 26.0 ~ 36.0 ~ 44.0
Current Draw at Idle 30 mAh
No Load Operating Current Draw 500 mAh
Stall Current Draw 6200 mAh
Dead Band Width 1 µs
Physical Specifications
Dimensions (Inches) 1.72 x 0.88 x 1.57
Dimensions (Metric) 43.8 x 22.4 x 40.0
Weight (Ounces) 2.76
Weight (Gram) 79.0
Circuit Type 32bit Programable Digital
Motor Type Coreless Metal Brush
Gear Material Titanium
Bearing Type Dual Ball Bearing
Output Shaft (type / Ømm) H25T
Case Material Plastic / Aluminum
Dust / Water Resistance Splash Proof
Connector Gauge (AWG) / Strand Count 20 / 80